Crossing And Wading Water Logo

Water crossings are common on most every trail. But do you and your horse cross without worry or do you ride along the shore hoping the water will dwindle to a drip? And does your horse move obediently and quietly forward across creeks and streams—or is he anxious and ready to jump even the smallest water source?

Here’s help if your horse isn’t used to crossing water slowly and safely or if you’re not sure how to make your crossing as safe as possible. Top clinician/trainer Julie Goodnight demonstrates the safe and proper way to introduce your horse to a creek water crossing and how to make sure you cross slowly and safely. Goodnight will help you identify the best place to cross and guide you through a step-by-step process to make sure that you and your horse are relaxed and take your time as you move through the ripples and currents.

Crossing water is a perfectly natural task for your horse—if he’s had the opportunity to cross, play in and even drink from an open water source. If your horse is often turned out in open areas or was bred and raised on a large ranch, there’s a chance that he’s crossed water with the herd. If that’s the case, your job may be easier. The sight and sound of moving water won’t be brand new. You’ll be able to focus on safe crossing habits—and focus on reminding your horse not to play—instead of worrying about your horse’s fears and reactions.

Keep in mind that many horses aren’t familiar with open water. If your horse was born and raised in a stall, his only encounters with water may be to drink from a bucket or get a bath from a hose. You’ll need to make sure that your horse is properly introduced to water that sounds, smells and feels like a new experience.

Exercise Prep

Horsemanship lesson: You’ll learn a safe sequence of steps to help you introduce a horse of any age to water and learn how to cross safely.
Why you need it on the trail: Most every trail has a water crossing that should be crossed safely and purposefully. Goodnight says she often sees riders who think it’s fun to jump water or to allow their horse to speedily maneuver to the other side. Jumping water is a great danger because you can seldom be sure of the footing near water. It also suggests that your horse is spooked by the noise and feel and is moving of his own accord to flee the scene instead of obeying your precise go-forward cues. When riders do stop and relax, she often sees horses that are allowed to paw and play without a correction—the behavior suggests a horse is ready to roll. While rolling is in general a bad idea when a rider is on board, rolling in moving water puts riders at risk for being swept away.

What you’ll do: You’ll help your horse negotiate a crossing by invoking his herd instincts. With a friend to lead you, your horse will see that he’s safe, learn to stand and relax mid-stream, then understand that your usual riding cues apply in this new environment as you ride along with the current instead of teaching your horse to rush across.

What you’ll need: Enlist a friend with a trusty, been-there-done-that trail horse who can act as your horse’s mentor and stay with you throughout your training session.

Ask friends who frequently ride in your area what water crossings are appropriate for first-time training sessions. As a general guide, look for a trail with a water crossing that’s flat and well traveled by horses. The stream shouldn’t be too deep or too fast. Look for a water crossing that you trust you could walk across without the water reaching above your knees or without a current that would prompt you to lose your balance. Look for clear water that allows you too see the footing on the bottom and be sure to avoid muddy and boggy crossings or ones with too much slick rock.

Make sure that your horse isn’t wearing a tie down or any tack that might prevent him from using his head and neck for balance if the water is unexpectedly deep and he needs to swim. Tie downs can be lethal if your horse needs to raise his head above water to breathe.

Notes: This is a good skill to teach your horse when the water in your area is low. Make sure to check with your local forest service or area wilderness guide to find out what the water conditions are where you’d like to practice crossing.
Skills your horse will need: Your horse should be responsive to your cues to move forward, stop and back as well as side to side. Make sure that you have good steering and speed control at the walk and trot while riding in open spaces. If your horse is familiar with easy trail obstacles (such as crossing poles or logs), you can better trust that your horse will go where you ask.

Step #1. The Introduction

Outfit your horse in his usual riding gear and set out on the trail until you reach your suggested and pre-planned water crossing. Ask your riding buddy to ride ahead then follow her to the water’s edge. When your horse reaches the shoreline, ask him to move forward and encourage his investigative behavior by reaching your hands forward and applying gentle leg pressure. If your horse seems curious (as our young horse does in Photo 1B), allow him to sniff and feel the water then encourage him to move forward and step in.

Make sure your horse doesn’t put his head down and rock back to jump the creek; jumping water is not a good trait in a trail horse. If you feel your horse stretch his neck forward then rock back, sharply correct him with a “whoa” command. As he investigates, don’t allow your horse to stand and paw at the water—pawing behavior isn’t a cute and playful habit, it’s a precursor signaling that he’s about to lie down to roll. Let your horse sniff and sip the water if he wants and even play in it with his nose—just be careful that too much play may also lead to lying down. Be vigilant and promptly tell your horse “whoa” and pull up and back on the reins if you feel that he’s shifting his weight or playing too much.

Take all the time you need to walk your horse into the water. Be patient with him during his investigation as long as he keeps looking at the water and doesn’t threaten to turn his nose away or back up. At this point, you’ve pointed him to the water and expect him to pay attention to the new experience. Insist that his focus stay ahead in the direction you are asking him to go. It’s okay to let him stand still, look forward, drink or sniff, but don’t let him turn away or back up. If you do, you’ll be training your horse that water is something to avoid and allowing him to choose where he goes.

When your horse seems calm and willing to pay attention to the water’s sights and sounds, it’s time to move in. Your riding buddy should already be ahead of you and in the stream. Ask her to stand in the middle of the stream, face upstream (with her horse’s head in the direction of the water’s source so that her horse isn’t knocked off balance).

Cue your horse to walk on—providing ample rein and applying gentle pulsating leg pressure to encourage him to move on. When you reach the middle of the stream, ask your horse to stop and relax your body and reins. Your calm position will show your horse that the water is a safe and comfortable place to be. It’s important to “hang out” for a few minutes until your horse stands quietly. Be patient! This literal “soaking time” will teach your horse that it’s not okay to rush across the water.

Even a seasoned trail horse may need to work on this training step. It’s important to cross water slowly and precisely so that you can choose the best and least-slippery path. And it’s important that your horse does not rush and plunge across.

Step #3. Down-steam Detour

Next, instead of continuing across the stream to dry land, change direction and lead your horse up and down the waterway. Spending some time in the water will help him get used to the feel of cold water on his legs and splashes to his barrel. Your water ride will also reinforce the lesson that you started in Step #2—don’t rush.

Spend five to 10 minutes walking up and down the stream. Pause every few moments and allow your horse to stand still in the water. When he seems quiet and confident, it’s okay to ride him across and out of the stream at a place you designate. Make sure the entrance and exit from the water is safe and reasonably easy for your inexperienced horse. Steep, slick embankments are scary for a horse and can make him concerned about future water crossings; slipping can cause injury as well.
Teach Respectful Drinking

Chances are, your horse will attempt to drink as you’re working on your water crossing skills. This is the perfect time to instill proper drinking behaviors as well as water crossing safety. Different types of trail riders have different ideas of what is good drinking behavior in a horse. Some trail riders want their horses to drink at any and every crossing in order to stay hydrated or to cut down on in-camp watering chores. Others want their horse to march obediently down the trail, crossing without stopping and keeping the ride moving; only drinking at designated times. Whatever your idea of perfect water behavior, instill it in your horse from the beginning.

The Different Types Of Bits Logo

Horse Master How To
“Get it Straight” Helping a frustrated rider find the right bit and cue her horse to move straight ahead
By Julie Goodnight

In the Horse Master episode we named “Get it Straight,” master bit maker, Dale Myler, joined me to help a horse and her frustrated rider move ahead with relaxation—and without a constant fight as the horse yanked the reins out of the rider’s hands. The show, featuring Julianne and her horse “Cherokee,” was named in part because Cherokee took any bit pressure as a cue to turn her head and move into a circle; it was also named to allude to the mishmash of information available about bits and bitting. As the Mylers like to say, “Help a horse be relaxed first and he can focus on what you’re asking.” If a bit is too big or has pressure points that interfere with the horse’s ability to swallow, the horse can’t relax and can’t easily focus on what the rider wants. While choosing to ride with no bit is an answer for some, the truth is that a kind and thoughtfully-created bit can provide you with a chance to cue your horse precisely for advanced maneuvers. Not all bits are bad, but it’s time to “Get it Straight.”

Types of Bits
There are two main types of bits–snaffles (direct pressure) and curbs (leverage bits). You may think that a snaffle bit is automatically mild and a curb bit is automatically harsh. Nothing can be further from the truth. There are many incredibly harsh snaffles on the market and there are very mild curbs.

In a snaffle bit, the reins are attached directly opposite the mouthpiece and cause a direct (pound-for-pound) pull on the horse’s mouth from the rider’s hands. A leverage bit has shanks (bars running alongside the horse’s mouth) and a curb strap (or chain) and the reins are attached below the mouthpiece. There isn’t direct pressure but leveraged pressure on the horse’s mouth. A curb bit can apply pressure to the horse’s lips, tongue and bars; as well as the poll, chin and palate.

A joint in the middle of the bit isn’t what makes a bit a snaffle; direct pressure, with the reins attached at the line of the mouthpiece, makes a snaffle. A bit with shanks, a traditional-styled jointed mouthpiece and a curb chain isn’t a snaffle—that bit is called a Tom Thumb and is one of the harshest bits available.

The Rider’s Hands
Many, if not most bitting problems originate with the rider’s hands. No horse wants pressure on his mouth, so he will always look for an escape from the pressure. If doing the right things (dropping his head and giving to the pressure) doesn’t get the release he is looking for, he begins to try other things, such as throwing his head up or rooting the reins. He’ll look for an answer that provides a momentary release. If he inadvertently gets a release when he is doing the wrong thing, the wrong thing becomes a learned response.

It isn’t important whether or not the bit is mild or harsh; what’s important is the way the rider uses her hands. The mildest bit in the wrong hands can be harsh and the harshest bit in the right hands can be mild. Also, changing bits will not fix a training problem with a horse. In other words, if you have a horse that’s going too fast, putting a stronger bit in his mouth will not fix the problem. Only more training will fix it. Changing to a harsher bit will often make a training problem worse because it causes the horse to feel anxious. A fast horse already has a tendency to speed up when he feels anxious, so the problem escalates.

The Horse’s Comfort
My tack room has been filled with Myler bits since they came on the market in the 1990s—and long before Dale Myler appeared on the TV show. I love them and have a tack room full of them-both snaffle and curb. They’re manufactured with the highest-quality materials, they’re ergonomically designed to fit a horse’s mouth comfortably, and they’re also designed for specific effectiveness. Myler makes a variety of but styles and each is rated for the horse’s level of training, so that your horse can move seamlessly from one bit to another as his training level increases and his needs change. The bits also come in a variety of cheek pieces—so you can choose the amount of leverage depending on who is riding and how educated the rider is about how to keep their hands quiet.

My favorite Myler bits are the comfort snaffle and the jointed curb bits. The snaffles have a curved mouthpiece, so that the bit is actually the shape of the horse’s mouth, giving him tongue and palate relief and making the bit more effective working off the corners of the mouth with the lightest possible pressure. The mouthpiece is made with sweet iron with copper inlays–giving the horse a sweet and saliva-producing taste in his mouth. I like a bit with the copper roller in the middle. I have about every level of curb bit too, for the Western horses that need to work in a curb. They’re made with the same high-quality materials and an effective shape and function.

Proper Introductions and Training
Many horses were never properly “bitted out” (taught to work in and accept a bit and understand the bit’s cues) and don’t know the correct way to respond to bit pressure. A surprisingly high number of horses were never really trained properly. Instead, well-meaning trainers stuck bits in their mouths and forceful pressure made the horses respond. A horse must be systematically trained to know what to do when he feels pressure on the bit and how to give both laterally and longitudinally (vertically) when he feels pressure. (I describe this process fully on my Bit Basics DVD available at Many older horses that fight the bit have become desensitized to bit pressure because their riders pulled too much. It’s common for horses to come “untrained” because of poor riding when they become defensive about their mouths because they never felt a release of pressure when they cooperated.

Many horses who have learned to ignore bit pressure—or who never learned how to respond in the first place—can learn quickly in the Goodnight Bitting System. The piece of tack, commonly called an elbow-pull biting rig teaches the horse to give longitudinally to the bit and be soft in the mouth and jaw. Without a rider on board and while working in a round pen, the horse gets an instant release when he places his head in the optimum self-carriage position. With his new learning in place, horses can more quickly understand an educated rider’s rein cues and move ahead without fighting and without confusion. It’s also important to do lateral flexes until the horse gives to the side, and then start over from the saddle teaching him to give to light pressure both vertically and laterally and find the release.

Good luck finding the correct bit for you and your horse—and keep in mind that you, the rider, have just as much to do with what bit will work best as what the horse is used to and most comfortable feeling. For more precise answers to your bitting questions, check out Dale’s multi-part video series online with a link at and visit the Myler’s online bitting questionnaire and guide at:
–Julie Goodnight